Specifications

• TYPE: 40

• Moving Speed: 5mm～6000mm／min

• Drive motor: AC servo motor

• Drive system: Rack-and-pinion

• Moving distance: 1～100mm

• Move mode:

Single mode: Automatic stop after moving the set distance
Repeat mode: Reciprocating motion over the set distance (up to 99,999,999 times)

• Range of measurement: 0～1000gf

• Table dimensions: 240mm×120mm

• Safety device:

Overload safety device
High frequency noise prevention circuit

• Dynamic distortion amplifier:

Zero point adjustment: Manual / auto zero ± 0.5 mV / V or less
Output (non-linearity): 0 to ± 5V (within ± 0.01% FS)
Zero point drift ･ ･ ･ 0.01% FS / ℃
Gain drift ･ ･ ･ 0.01% FS / ℃
Low-pass filter: Approximately 500Hz

• Usage environment: 0 to 50 ° C within 85% RH, but no condensation

• Power supply: AC100V 50／60Hz

• Overall dimensions:

Body: W475mm x D450mm x H475mm * Excluding protrusions

• Accessories:

1 load transducer, 1 scratch needle, 1 set of Φ10 mm ball indenter,
1 set of ASTM flat indenters, 1 power cord (2 m with 2P / E), 1 parts case,
1 set of tools, 1 copy of instruction manual